Feature:
1. Accurate Measurement: This digital LED tachometer offers a wide measuring range of 0 9999 RPM with an accuracy of + (2percent +1). The 2 times per second display refresh rate ensures real time updates, making it suitable for speed detection in lathe, conveyor, or quality inspection machine
2. Less Interference: Equipped with Hall proximity switch sensor and weak magnetic component, this RPM speed meter delivers dependable measurements by minimizing interference. Its robust design ensures consistent performance even in challenging industrial environments
3. Clear LED Display: The 4 digit display and high brightness red LED digital tube provides clear reading and easy measurements, with visual alerts for under range (LLLL) or over range (HHHH) speeds. Designed for visibility in low light conditions, it simplifies speed tracking at a glance
4. Key Description: Long press SET key for 3s to enter parameter settings, and if there is no work within 6s, it will automatically exit the settings without storage; Continuously press the SET key to set the H1 to H9 parameters and automatically store and close them; Press the + and key to adjust the parameters, and the corresponding digit will flash
5. Versatile Functions and Applications: This digital LED tachometer supports multiple measurement units and features a ultra low speed function. Suitable for diverse applications from high speed motors to precise slow moving equipment
Specification:
Item Type: Digital LED Tachometer
Product Material: ABS
Basic Parameters:
Input Signal: Proximity Photoelectric Electronic Switch NPN Normally Open (Non Linear Change Signal)
Speed Unit:
1: 000.0r s 999.9r s;
2: 00.00r s 99.99r s;
3: 0000r s 9999r s;
4: 0000r min 9999r min;
5: 00.00r min 99.99r min (Ultra Low Speed Function)
Basic Accuracy: + (2percent +1)
Conversion Rate: Standard 2 Times S, Ultra Low Speed Function Varies with Signal Time
Lowest Speed: 3RPM for Ultra Low Speed Function, 30RPM for Other Functions
Stop Ring Time: 40 Seconds for Ultra Low Speed Function, 4 Seconds for Other Functions
Output Mode: Switch Quantity
Output Contacts: Normally Open, Normally Closed Available
Sensor: NPN Normally Open Type
Display: 4 Digit; 0.56 Inch High Brightness Red Digital Tube
Working Environment: 10 celsius 150 celsius
Function Parameters:
H1: Function: Upper Limit Value; Default: 9000; Function Description: Upper limit value set maximum 9999. When it is set to 0000, this function is turned off; When the speed exceeds the maximum value, HHHH will be displayed and a bell will ring; Upper limit value only determines the data value, not need to consider the decimal point
H2: Function: Lower Limit Value; Default: 0; Function Description: Lower limit value set maximum 9999. When it is set to 0000, there will be a ringing output after stopping; Lower limit value only determines the data value, not need to consider the decimal point
H3: Function: Speed Mode; Default: 4; Function Description: 1: 000.0 r s to 999.9 r s; 2: 00.00 r s to 99.99 r s; 3: 0000 r s to 9999 r s; 4: 0000 r min to 9999 r min; 5: 00.00 r min to 99.99 r min (ultra low speed function)
H4: Function: Speed Ratio; Default: 1; Function Description: Data Range: 0.001 9.999; The ratio can be set according to the speed situation, such as the ratio of the reducer on the motor. If the motor exceeds the range of 9999, this parameter can be set to 0.100 to reduce the data to 0.1 times. In this way, this meter can measure signals up to tens of thousands of revolutions
H5: Function: Ringing Delay; Default: 1; Function Description: When the upper and lower limit conditions are reached, the meter will conduct multiple detection within a certain period of time to determine whether to ring and output. This parameter determines the unit of time length, seconds, with a maximum of 999.9 seconds
H6: Function: Ringing Duration; Default: 999.9; Function Description: When the bell rings, this parameter can be set to automatically stop ringing after a certain period of time. When set to 999.9, it will ring continuously. When set to 000.0, it does not ring
H7: Function: Ringing Stop Method; Default: 1; Function Description: Stop Condition 1: The duration ends, the speed resumes, press + key; Stop Condition 2: The duration ends, press + key
H8: Function: Sensitivity; Default: 1; Function Description: Data range: 1 5. When the parameter is 5, the response is slow and the data jitter is small
H9: Function: Ringing and Indicator Light; Default: 1; Function Description: When the speed reaches the limit, a sound is emitted. When the speed reaches the limit, no sound is made, but the indicator light is on.
Package List:
1 x Speed Meter
1 x Sensor
1 x Weak Magnetic Component
1 x Bracket
Note:
1. Try to reduce the use of strong electromagnetic devices to avoid interference;2. Ensure that the Hall switch and magnet are securely fixed during the testing process to prevent vibration from causing fluctuations or inaccurate readings. Additionally, the distance between the Hall switch and magnet should not exceed 10mm.