[Product Description]
[Product Description]
[Product Description]
Equipped with Japan's first 'full-circle' ring illumination LED light, offering optimal balance, a full-circle slim head, and comfortable operability.
* As of December 2022, according to Makita's research on domestic cordless impact drivers.
Significantly improves visibility during work. Brightness is approximately 2.5 times higher (compared to Makita's previous 18V models). Illumination can be switched among three levels (High / Medium / Low).
* As of December 2022, according to Makita's research on domestic cordless impact drivers.
Can also be used as a work light. The 'Light Mode' provides simple illumination. The lighting time is approximately 1 hour.
Features a new trigger switch. Allows intuitive trigger speed control from low to high speeds.
The grip area is close to the spindle, making it easier to press the spindle with your hand near the head. Reduces cam-out.
The battery is offset to the rear, optimizing the center of gravity for balanced tightening in all directions and reducing interference with obstacles.
The operation panel is positioned at the rear for easy visibility and usability. You can operate modes and check remaining battery capacity while holding the tool.
Industry's smallest bit runout, using double ball bearings. Features a new shape bit sleeve with ribs on the edge to prevent damage when the sleeve contacts materials.
As of December 2022, according to Makita's research on domestic cordless impact drivers.
Tilt angle of approximately 10.5°, providing excellent cornering performance and reducing cam-out. Comfortable for work near walls.
Allows selection of the optimal mode according to the work. Mode memory function enables registration of a frequently used mode by pressing two buttons simultaneously. You can switch between the 'just-used' mode and the 'registered' mode with a handy button.
Powered by a 18V DC slide-type Li-ion battery. Battery and charger sold separately.
Tightening capacity: Small screws M4–M8 / Regular bolts M5–M16 / High-torque bolts M5–M14 / Wood screws 22–125mm.
Maximum tightening torque: 180N·m.
Rotational speed [rpm]: Fastest 0–3,600 / High 0–3,200 / Medium 0–2,100 / Low 0–1,100.
Easy Mode rotational speed [rpm]: Wood 0–1,800 / Bolt 0–3,600 / Thin sheet metal 0–2,900 / Thick sheet metal 0–3,600.
Impact rate [per minute]: Fastest 0–3,800 / High 0–3,600 / Medium 0–2,600 / Low 0–1,100.
Easy Mode impact rate [per minute]: Wood 0–3,800 / Bolt 0–3,800 / Thin sheet metal impact stops immediately after impact starts / Thick sheet metal 0–2,600.
Estimated work amount per charge (using wood screws φ4.3×65mm): approximately 960 screws.
Dimensions: Length 111mm × Width 81mm × Height 234mm.
Weight: 1.5kg (including battery).
[Important Notice - For Overseas Customers]
Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.
1. Laws, Regulations, and Safety Standards
This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards.
Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.
2. Regarding Electrical Products
【Voltage Compatibility】
When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.
【Plug Type】
Our products use Japanese plug types (Type A or Type B).
Please use a conversion adapter as needed.
【Important Notes Regarding Transformers and Adapters】
Transformers adjust the voltage to match the requirements of the equipment.
Conversion adapters only change the plug shape and do not adjust the voltage.
Using only a conversion adapter without a transformer may damage the product.
[Regarding Liability]
We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.
3. Language and Manual
Product instructions and displays may be in Japanese only.
An English version of the manual can be downloaded from our website.
4. Regarding Product Returns and Exchanges
Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.
[Important Notice - For Overseas Customers]
Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.
1. Laws, Regulations, and Safety Standards
This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards.
Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.
2. Regarding Electrical Products
【Voltage Compatibility】
When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.
【Plug Type】
Our products use Japanese plug types (Type A or Type B).
Please use a conversion adapter as needed.
【Important Notes Regarding Transformers and Adapters】
Transformers adjust the voltage to match the requirements of the equipment.
Conversion adapters only change the plug shape and do not adjust the voltage.
Using only a conversion adapter without a transformer may damage the product.
[Regarding Liability]
We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.
3. Language and Manual
Product instructions and displays may be in Japanese only.
An English version of the manual can be downloaded from our website.
4. Regarding Product Returns and Exchanges
Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.
[Important Notice - For Overseas Customers]
Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.
1. Laws, Regulations, and Safety Standards
This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards.
Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.
2. Regarding Electrical Products
【Voltage Compatibility】
When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.
【Plug Type】
Our products use Japanese plug types (Type A or Type B).
Please use a conversion adapter as needed.
【Important Notes Regarding Transformers and Adapters】
Transformers adjust the voltage to match the requirements of the equipment.
Conversion adapters only change the plug shape and do not adjust the voltage.
Using only a conversion adapter without a transformer may damage the product.
[Regarding Liability]
We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.
3. Language and Manual
Product instructions and displays may be in Japanese only.
An English version of the manual can be downloaded from our website.
4. Regarding Product Returns and Exchanges
Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.
Rimborso per mancata consegna
