[Amon Online Exclusive] Freed (GB5/GB6/GB7/GB8) Dedicated LED Footlight Kit for Front and Rear Seats, White FW113

*Caution* [Please read before purchasing] ▼Vehicles equipped with dealer options or aftermarket parts that have interior lighting functions, such as rear seat monitors or room lamps with air purification functions, may not function correctly and therefore cannot be installed.

▼Not compatible with vehicles that have factory-installed LED room lamps.

▼If using LEDs other than those included in this kit, please pay attention to the available power.

▼In vehicles equipped with idle stop, the LEDs may flicker when the engine starts after the function has activated, but this does not mean the unit is damaged.

▼Cannot be installed in vehicles with autopilot function.

▼Each power wire is taken from the fuse box at the driver's footwell using a dedicated coupler.

▼If a coupler is already inserted in the designated coupler insertion position, this kit cannot be used.

[Product Functions] ◆Footlights gradually illuminate and dim in conjunction with door opening and closing. (The gradual illumination function can be turned ON/OFF.) ◆Footlights illuminate in conjunction with engine start.

* Features a 2-stage brightness setting (100% and 30%).

* Footlights illuminate in conjunction with the small lamps.

* Features a 4-stage brightness setting (100%, 30%, 10%, and 3%).

* Event Mode * Two patterns available (slow flashing and fast flashing)

* Battery load reduction function (automatic shut-off) * If the door is left open for more than 10 minutes, the lights will automatically shut off to reduce battery load.

* Does not operate in event mode.

* Event mode automatically switches back to normal mode after a maximum of 1 hour of continuous use.

【Kit Contents】 ・LED control unit x 1 ・Unit-specific harness x 1 ・Double-sided tape x 1 ・Dedicated 3-LED flat LED x 4 ・Extension harness x 2 ・LED mounting bracket x 4 ・Low-profile fuse x 1 ・Power extraction harness x 1 ・Panel removal tool x 1 ・Wiring guide x 1 ・Wiring ties x 6

【Product Specifications】 ■LED control unit ・For DC12V vehicles only ・Output current: 2A or less ■Dedicated 3-LED flat Rat LED • For DC12V vehicles only • Current consumption: 60mA/piece • Cord: Equivalent to 0.2 sq - 1m length ■ Dedicated harness • Black/White, Black (thin wire): Equivalent to 0.2 sq - 50cm length • Yellow: Equivalent to 0.5 sq - 50cm length • Red: Equivalent to 0.5 sq - 50cm length • Black: Equivalent to 0.5 sq - 1m length • Blue: Equivalent to 0.5 sq - 50cm length • Orange: Equivalent to 0.5 sq - 50cm length The specifications of the lens cover will be changed sequentially. (No changes to the LED unit itself) Compatible vehicles: Honda Freed (GB5/GB6/GB7/GB8) [September 2016 - November 2017] Superior functionality and practicality to the original; LED lights that brighten up various scenes No special tools required; DIY footlights that can be installed while watching vehicle-specific installation videos (for purchasers only) LEDs light up and turn off smoothly in conjunction with the door (linked to the interior lights)