Feature:
1. Ultrasonic Cleaner is used for cleaning glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB circuit boards.
2. Ultrasonic working time is 1 20 minutes, heating temperature is up to 80 degrees C, suitable for different occasions.
3. High quality components, high ultrasonic efficiency, powerful power, good cleaning effect.
4. Improve conversion efficiency and safety with safe and efficient transducers.
5. The shell is made of high quality anti fingerprint stainless steel embossed plate, which is beautiful and elegant.
6. The cleaning tank is made of high quality stainless steel in one step stamping forming, no welding parts, better waterproof performance.
7. Using the most advanced bonding technology in Germany, never wear cylinders, and the cylinder does not fall off.
Specification:
Item Type: Ultrasonic Cleaner
Model: 820HT
Type: Mechanical Timing Heating
Inner Tank Capacity: 22L
Inner Groove Size: Approx. 500 x 300 x 150mm 19.7 x 11.8 x 5.9in
Dimensions: Approx. 550 x 330 x 330mm 21.7 x 13 x 13in
Ultrasonic Frequency: 40KHz
Ultrasonic Power: 480W
Heating Power: 500W
Number Of Vibration Heads: 8
Working Time Range: 1 20Min
Temperature Range: 0 80 degrees C
Liner Material: SUS304 Stainless Steel
Shell Material: Stainless Steel
Basket: Equipped
Sound Reduction Cover: Equipped
FAQ:
Q: What is an ultrasonic cleaner?
A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Q: Which products can this ultrasonic cleaner cleaning?
A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc.
Q: Which builders can be properly added for better cleaning during the cleaning process?
A: You can add cleaning liquid or detergent, such as: dish detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage.
Operation process:
1. After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose.
2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position;
3. Add an appropriate amount of cleaning solution (2 3 groove depth <L<3 4 groove depth) as required for cleaning;
4. Connect the power plug correctly: Make sure that the power supply has a reliable grounding wire!
5. Adjust the ultrasonic working time:
Mechanical timing type: After turning on the power, turn the right timer knob clockwise to reach the required cleaning time on the 0 to 20 minute time dial. The indicator light is on and a ZIZI sound is emitted, indicating that the ultrasound starts to run.
Digital type: After the power is turned on, the right digital screen displays 0700 to indicate that the default setting time is 7 minutes and 00 seconds. Each time the TIME+ or TIME button is pressed, the time is increased or decreased by 1 minute. After the button is set, press the ON OFF button, the ultrasonic wave starts to work, and the digital timer counts down. The time setting of this unit has a memory function. After the set time has elapsed, press ON OFF repeatedly, and the machine will continue to work according to the time set by the previous time.
6. Adjust the working temperature (select heating if necessary; mechanical type without heating):
Mechanical type: Rotate the left temperature controller clockwise to the desired temperature (20 degrees or more). The heating indicator lights up and the heating element starts to work.
Digital type: The left digital screen displays 50 and the actual temperature XX , indicating that the default setting temperature is 50 degrees. Each time the TEMP+ or TMEP button is pressed, the temperature is adjusted up or down by 1 degrees C. After the button is set to the operating temperature, press the ON OFF button and the heating element starts to work. (The heating function can be freely switched, which is another feature of this machine)
7. Shut down after completing work:
After the cleaning work is completed, if it is not necessary to operate, the heating element should be turned off first, and the power supply should be disconnected. After the cleaning liquid is cooled to normal temperature, the cleaning liquid is drained, and the inner tank and outer casing are wiped cleaning. The used machine should be placed in a dry and ventilated place to avoid moisture in the control circuit..
Package List:
1 x Ultrasonic Cleaner1 x English Manual1 x Power Cord
Note:
1. When the ultrasonic wave is in normal operation, the uniform sound of the ultrasonic wave and the tank body should be heard, and the surface of the cleaning liquid is not excited. Only the ripple caused by the hole blasting, if there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid. Eliminating the oscillations helps to cleaning the objects;2. Under the premise of ensuring that the cleaning objects are cleaning, work as intermittently as possible and do not warm, because the warming and long time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic devices;3. Never use flammable and corrosive detergents;4. When there is no proper cleaning solution in the cleaning tank, the heating and ultrasonic waves must not be turned on;5. Prevent cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, burning electrical components;6. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury);7. When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! (After cleaning, do not accumulate in the cleaning tank!)8. Keep the appearance of the machine cleaning when cleaning; cleaning the machine after stopping, keep the whole machine cleaning and dry;9. Each working time should not be too long. It should be stopped for five minutes after 15 minutes of power on to better protect the machine and reduce the failure rate.
Rimborso per mancata consegna
