Feature:
Input voltage: 12 V, RF operating mode: superheterodyne
• Receiver sensitivity:> 97dbm
• Transmission distance:> 100 m (open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Remote type support: EV1527 learning code
• Operating mode: momentary, toggle, locking delay (5 s, 10 s, 15 s)
• Exit terminal: no, NC, COM
• Dimension of the printed circuit: 35x30x18mm (L, W, H)
• Remote control battery: 2 button batteries 3 V CR2016
Remote programming
-Clear code:
Press the learning button on the receiver 8 times, the codes will be reset.
After erasing the code, the remote controls must be recalibrated.
-Learning code: (toggle-press the remote button to turn on, press again to turn off.)
Press the learning button on the receiver 2 times, wait a moment, the LED will be off, it will enter the learning state.
-Press the teach button on the receiver 3 times, the LED (on the receiver) will flash 3 times.
When the LED is on, press the button on the remote control (you want to let it learn), press the A button on the remote control, LED the flash 3 times.
Press button B on the remote control, the LED flashes 3 times.
After 3 seconds, the LED indicator will be off, learning to succeed.
Package including
1 * receiver module
1 * remote control (with battery)
Rimborso per mancata consegna
