Note:
Please note that the controller is a fourwire PWM fan controller can control fourstandardized protocols in line for Intel"s fourwire fan (all four lines of the chassis and CPU fan are met, a server with more than 97percent can control fan violence). Unable to control twowire or threewire fan, you can not completely turn off the fan!
BF1, BF2 (No.4,5) correspond to FAN1, FAN2 stop alarm function switch. When the corresponding open, the controller will sound (with buzzer needed) and light alarm, fans restored after the alarm is cleared automatically rotated. If BF1 and BF2 are open (ON), the FAN1, FAN2 have any one or two stops, the controller will alarm.
Not for:
Delta FFR0612VHE, FFR0612DHE, Dimensions 6038, Nonstandard antitiming fan (reverse adjust speed)
Features:
Accurate temperature setting and precise control.
The controller only controls the speed of the all standard fourwire chassis fan and CPU fan for Intel.
It integrates manual speed regulation and automatic temperature control and speed regulation function.
When the corresponding open channel fan break down, the controller will alarm with sound and light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery.
When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed.
Specification:
Board Size: Approx. 5.3*4.5cm2*1.7inch
Positioning Hole Position: 44*37mm1.7*1.5inch
Positioning Hole Diameter: 3mm
Circuit Load Capacity: Maximum current per output 4A, the bus currents up 9A
Output Range:
The First Channel: 20percent 100
percent or 40percent 100percent (TFL=ON)
The Second Channel: 10percent 100percent
The Third Channel: 10percent 100percent
Note:
The above range only
PWM range, the actual fan control effect will vary depending on the fan.
Temperature Probe Parameters: 50K B=3950
Thermostat Temperature Zone Error: Generally 35percent (Depend on the temperature probe)
Stall Alarm Minimum Speed: 700800 rpm
Weight: Approx. 1
7g 0.6oz
Function Setting Switch Description:
(Any changes to the setting must be
repo
wer
ed
to start before it takes effect)
TFL (No. 1): PWM channel with the lowest te
mperature setting, when ON, the lowest PWM of FAN1 is 40percent ; when OFF, the minimum PWM of FAN1 is 20percent
TP1 and TP2 (No. 2 and 3): Temperature channel control temperature zones are interpreted as follows (need to match the tempera
t
ure probe used):
TP1
TP2
Accelerated
Temperature
Full Temperature
OFF
OFF
35 celsius
45 celsius
ON
OFF
40 celsius
55 celsius
OFF
ON
50 celsius
70 celsius
ON
ON
60 celsius
90 celsius
Package List:
1 x PWM Fan Speed Controller
1 x Buzzle
1 x Probe
Accurate temperature setting and precise control
The controller only controls the speed of the all standard fourwire chassis fan and CPU fan for Intel
It integrates manual speed regulation and automatic temperature control and speed regulation function
When the corresponding open channel fan break down, the controller will alarm with sound and light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery
When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed
Rimborso per mancata consegna
