Feature:
1. MULTI FUNCTION: Not only can test the standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, isolate and attenuate test cable, shorten the coefficient of antenna amplifier, phase, amplification
2. MEET ORIGINAL TECHNICAL SPECIFICATIONS: 3GHz vector network analyzer is co designed with for OwOComm. According to the LGPL license agreement, manufactured in full accordance with the v2_2 file released by the development department of for OwOComm, in line with the original technical specifications, please go to the following path to update the firmware: github vna?v2, VNA2?firmware, release
3. RE CALIBRATED OR RECALLED WHEN FREQUENCY CHANGE: SAA?2NVNA_V2.2 uses a similar user interface to VNA, but uses a different technical architecture, will not load initial calibration data at startup, nor will automatically insert calibration data after the user changes the frequency data, must be re calibrated or recalled after each power on and frequency change
4. TRANSMISSION MEASUREMENT: S21 support 70dB (50KHz?1.5GHz), 60dB (1.5GHz?3GHz). Reflection measurement S11 for ?50dB (50KHz?1.5GHz) and ?40dB (1.5GHz?3GHz); Antenna analyzer support 1.005 (50KHz?1.5GHz), 1.02 (1.5GHz?3GHz); You can flip the display to easy to use
5. FOR VARIOUS SOFTWARE: The device can be controlled from a PC via for VNAQT software and supports for Linux, for Windows (7+), for OS X plans. Also supports VNASaver to extract data for display on computer and save to for Touchstore file
Specification:
Item Type: Vector Network Analyzer
Frequency Range: 50kHz 3GHz
System Dynamic Range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (calibrated): 50dB (up to 1.5GHz), 40dB (up to 3GHz)
Frequency Sweep: 100 points per second
Display: 4in, 320 x 480
USB Interface: Micro USB
Power Supply: USB, maximum charging current 1A
Battery: 3000mAh Li ion
Battery Connector: JSTXH 2.54mm
Maximum Scan Points (on device): 201
Maximum Number of Scan Points (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 Return Loss (3GHz): 13dB min
VNAQT Software Support Platform: For Linux, for Windows (7+), for OS X plan.
Package List:
1 x SAA2N Host2 x Type N Male to Male RG142PUR RF Cable1 x Micro USB Cable1 x Touchscreen Picks And Lanyards1 x Type N Male Calibration Kit OPEN1 x Type N Male Calibration Kit LOAD1 x Type N Male Calibration Kit SHORT1 x Type N Female To Female Connector1 x EVA Storage Bag1 x User Manual
Note:
Please read the user manual carefully before use to avoid damage to the device.MULTI FUNCTION: Not only can test the standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, isolate and attenuate test cable, shorten the coefficient of antenna amplifier, phase, amplification
MEET ORIGINAL TECHNICAL SPECIFICATIONS: 3GHz vector network analyzer is co designed with for OwOComm. According to the LGPL license agreement, manufactured in full accordance with the v2_2 file released by the development department of for OwOComm, in li
RE CALIBRATED OR RECALLED WHEN FREQUENCY CHANGE: SAA?2NVNA_V2.2 uses a similar user interface to VNA, but uses a different technical architecture, will not load initial calibration data at startup, nor will automatically insert calibration data after th
TRANSMISSION MEASUREMENT: S21 support 70dB (50KHz?1.5GHz), 60dB (1.5GHz?3GHz). Reflection measurement S11 for ?50dB (50KHz?1.5GHz) and ?40dB (1.5GHz?3GHz); Antenna analyzer support 1.005 (50KHz?1.5GHz), 1.02 (1.5GHz?3GHz); You can flip the display to eas
FOR VARIOUS SOFTWARE: The device can be controlled from a PC via for VNAQT software and supports for Linux, for Windows (7+), for OS X plans. Also supports VNASaver to extract data for display on computer and save to for Touchstore file
Rimborso per mancata consegna
