Main Features:
Metal sheet cutter for making cutting jobs easier, safer, and quicker
Double cutting heads, easy to operate and labor-saving
360-degree rotating cutting head, cutting in any angle or direction according to your needs
Suitable for 1.8mm iron plate, 1.2mm stainless steel, 2mm copper or aluminum plate, 2mm plastic or plywood and so on
Can work with 8mm electric or pneumatic drills
Minimum cutting radius: 12mm
Application: Gardening Tools
Product size (L x W x H): 13.00 x 6.00 x 4.00 cm / 5.12 x 2.36 x 1.57 inches
Package Contents:
1 x Cutter, 1 x Handle, 1 x Spanner
Note:
1. Refueling frequently at the edge of the knife head, especially cutting aluminium sheet, is particularly important.
2. Open the electric drill first, then cut it, exit the electric drill first, then turn off the electric drill.
3. When cutting, the cutting edge of the cutter rod must be kept perpendicular to the cutting workpiece in order to prevent hard bending.
4. Tool rod replacement: Open the cover, take out the anti-loosening nut, loosen the tightening screw, use the hammer to pull out the tool rod and reinstall it.Tool rod, screw tightening is available
Directions for use
1. When the thin plate opener is used, the front section of the electric drill and the cutter are inserted into the round hole of the opener to make the cutter.
Connect with the electric drill and lock it, then tighten the three pillar screws on the shelf to prevent the hole opener shelf from sliding.
Adjust and tighten the screw and fix the ruler firmly to ensure the accuracy of cutting round holes. Insert the ruler rod left to right positioning needle upward into the small square hole of the shelf, and finally according to the size of all cutting arcs.
2. Cutting standard arc is that thin plate opener should be used to ensure smooth and beautiful arc section, and drilling should be done first.A 3mm positioning hole and a 12mm hole are drilled to cut the knife head into the inner and outer circles of the hole.
Rimborso per mancata consegna
